Grace Lone Worker Supervisor's System Package

Grace Lone Worker Supervisor’s System Package

General Description:

It is simple, the SC500-SM Supervisors Model is used to monitor and identify the user of  TPASS®3, TPASS®3-AM, and SC500-LW.  Intrinsically Safe for hazardous atmospheres and extremely rugged for harsh environments. Grace Locator Beacons can be added to assist in locating the Lone Worker.

MADE IN USA - Build and configure your own package of SC500-SM, SC500-LW, TPASS®3, or TPASS AM

Wireless Monitoring Devices designed to monitor the alarm status and location of multiple users.

NOTE: This is a custom built system. We will contact you with lead time and estimated ship dates.

Video: http://graceloneworker.com/SupervisorWeb.mp4

TPASS®3-AM Alarm Monitor features:

• Transmit Motion and Manual Panic Alarms
• Receive alarms from all other Grace devices with a loud audible and visual alert signals
• Receive Evacuation Command from Grace-Watch® and SMS Monitoring Systems with a loud audible and visual alert
• Transmit Grace Locator Beacon position- requires Grace Locator Beacon

When ordering select:

• Quantity
• Activation Type
• Manual or Automatic ActivationCharger Type – 120VAC, 12VDC, or International Voltage
  • If Automatic Activation is selected, select desired Motion Timing 60, 90, or 120 seconds. (Motion timing cannot be changed in the field, requires a return the factory and a reprogramming fee $150 each)

TPASS®3 features:

• Transmit Motion and Manual Panic Alarms
• Receive Evacuation Command from Grace-Watch® and SMS Monitoring Systems with a loud audible and visual alert
• Transmit Grace Locator Beacon position- requires Grace Locator Beacon

When ordering select:

• Quantity
• Activation Type
• Manual or Automatic Activation
  •  If Automatic Activation is selected, select desired Motion Timing 60, 90, or 120 seconds

(Motion timing cannot be changed in the field, requires a return the factory and a programming fee $150 each)

• Charger Type – 120VAC, 12VDC, or International Voltage

SC500-SM Supervisor Alarm Monitor features:

• Transmit Motion and Manual Panic Alarms
• Caple of disabling motion timing and set motion timings
• Ability to manually power on and off
• Receive alarms from all other Grace devices with a loud audible and visual alert signal and  screen display of device name or number in alarm (name and location identification requires the USB-IRP programmer- sold separately)
• Receive Evacuation Command from Grace-Watch® and SMS Monitoring Systems
• Transmit Grace Locator Beacon position- requires Grace Locator Beacon
• Display Grace Locator Beacon position when receiving an alarm- requires Grace Locator Beacon

When ordering select:

• Quantity
• Charger Type – 120VAC, 12VDC, or International Voltage

SC500-LW Supervisor Alarm Monitor features:

• Transmit Motion and Manual Panic Alarms
• NOT capable of  disabling motion timing or setting motion timings
• Automatically power on and off - only by removing an returning from/to a powered charging cradle
• Receive alarms from all other Grace devices with a loud audible and visual alert signal and  screen display of device name or number in alarm (name and location identification requires the USB-IRP programmer- sold separately)
• Receive Evacuation Command from Grace-Watch® and SMS Monitoring Systems
• Transmit Grace Locator Beacon position- requires Grace Locator Beacon
• Display Grace Locator Beacon position when receiving an alarm- requires Grace Locator Beacon

When ordering select:

• Quantity
• Desired Motion Timing 60, 90, or 120 seconds (Motion timing cannot be changed in the field, requires a return the factory and a programming fee $150 each)
• Charger Type – 120VAC, 12VDC, or International Voltage

LT100-H Grace Locator Beacon:

Powered by Lithium Battery-  (Battery Life approximently  1 year- transmits low battery)

--or--

Powered by External Power-  (includes 120VAC wall transformer)

• When in range of the beacon, the Grace Lone Worker device receives the beacon message and transmits it’s locator code to Grace-Watch® and SMS Safety Monitoring systems.
  • Grace-Watch® software will display an overlay position on a customer provide image. 
  • SMS Safety Monitor will display a user defined name for the location.

• When in range of the beacon, the Grace Lone Worker device receives the beacon message and, when in alarm, will transmits it’s locator code a SC500-SM or SM500-LW (location name requires the USB-IRP programmer- sold separate)
• Minimum detection range is 30 feet in the lowest range setting.
• Low Power condition is displayed on SC500, Grace-Watch®, and SMS Safety Monitor

When ordering select:

• LT100-H-L        
• Quantity
• LT100-H-EP       
• Quantity

Auto Activation (TPASS®3-AM, TPASS®3 and SC500-LW)

Auto Activation devices are automatically powered on when the Accountability Key is removed or removed from the powered charging cradle. The auto activation models cannot be powered off until the key is re-affixed and manually powered or place back in the powered charging cradle. The TPASS®3 AM is also offered in a manual activation model that does not require an Accountability Key  to power off.

Motion Timing (All Models- SC500 and TPASS®3, and TPASS®3-AM)

Motion timing on the works like this, when the device is motionless, a timer begins to count-down from a factory default of 90 seconds; until the user moves and resets the timer.

If the timer is allowed to count- down to 10-15 seconds, the device will go into pre-alert which prompts the user to move. If the user does not move, the timer will continue to count down to zero seconds; it is then that the device will go into full audio alarm and transmit  the alarm status to any of these monitoring devices:

• TPASS®3 AM
• SC500-SM
• SC500-LW
• MS1000X
• Grace-Watch® Safety Monitor
• SMS Safety Monitor

THIS IS IMPORTANT

It is important to consider motion timing and its practical use in your application.

Motion timing of the TPASS®3-AM, TPASS®3, and SC500-LW are factory configured and cannot be changed in the field; any changes in motion timing will require the device to be returned to the factory and will require a fee of $150 each to reprogram.

It is important to consider motion timing and its practical use in your application. The most common motion time settings are 90 or 120 seconds. The potential for false alarms will increase when using shorter motion time settings. 

All models of the TPASS®3 have a very loud audio alarm with a sound pressure rating of 92 dba.

All models of the SC500 have a loud audio alarm with a sound pressure rating of 75 dba.

All models of the TPASS®and SC500®models are all rechargeable with 80 hours of use in standby operation

• 4-6 hours of operation in full alarm
• 6-8 hours to recharge.

Battery charger types available are 120 VAC, 12 VDC, or International Voltages .

Device in this package configuration typically provide outdoor LINE OF SITE COVERAGE up to 1.5 miles

THIS IS IMPORTANT

The line of site distance of 1.5 miles was tested over water; when used over land, changes in terrain elevation and foliage will have an effect.

When used indoors, typical indoor performance is 75,000 to 100,000 square feet

Indoor performance is solely dependent upon building construction and layout.

Grace lone Worker system dealers are available across the USA and Canada and are trained and certified to provide on-site surveys and consulting services

This grace system configuration does not have to rely upon a cellular telephone application or cellular telephone system to transmit a lone worker alarm.

This grace system configuration does not have to rely upon the Internet or monitoring from a website.

Grace Lone worker supervisor’s systems provide an immediate notification of a lone worker in distress.

This system is configured to operate without any monthly fees or annual subscriptions

Don’t rely on “check –in” systems, you need a grace lone worker immediate notification system.