SuperPASS® 5X - NFPA Compliant PASS
$0.00
(No reviews yet)
Write a Review
SuperPASS® 5X - NFPA Compliant PASS
SuperPASS® 5X Emergency Signaling worker-worn pendant is the toughest Grace pendant tested to 500° F for the harshest environments. It's IP67 rated for water ingress, intrinsically safe (UL913/CSA); and NFPA certified to 1970 (1982), 2025 Edition.
SuperPASS®5X is a SuperPASS®5 that includes all the additional RF hardware of TPASS®5. SuperPASS®5X functions 100% as a SuperPASS®5 until you're ready to use it with Grace In-Command® Firefighter Emergency Signaling and Accountability systems. All that's required is a simple field software upgrade to turn your SuperPASS®5X into a TPASS®5 - no need to return any equipment for modification. In-Command® Firefighter Accountability software required for SuperPASS®5X upgrade to RF PASS.
Field Upgrade the SuperPASS®5X AT ANY TIME - allows departments to spread the cost of an Accountability System purchase across budget cycles.
- Purchase the SuperPASS®5X and you have an RF ready, stand-alone, NFPA certified PASS that keeps you in compliance at all times.
- At any time and without needing to return your equipment, you can purchase the field software upgrade and transform SuperPASS®5X into a NFPA compliant RF PASS*.
- The field upgraded SuperPASS®5X can be used with In-Command® First-In and In-Command® Full Crew Systems to enable Emergency Signaling and Automated Intelligent Accountability.
In-Command® Firefighter Accountability software required for SuperPASS®5X upgrade to RF PASS.
- Intrinsically Safe to UL913, and CSA C22.2, No. 157
- Certified to NFPA 1970 (1982), 2025 Edition
- Bright, Highly Visible LED Status Indicators
- Auto-On Activation with Accountability Key
- Large Stainless Steel Grip-Clip & D-Ring
- 98+ dBA Sound Pressure Level at 500°F (260° C)
- Data-Logging All PASS Status Changes (On, Off, Alarm, Etc.)
- Heat Stress Temperature Alarm
- 30 Second No-Motion Time - NFPA Standard
- Three AA Batteries Included
SP® 5X factory default No-Motion timing is 30 seconds (NFPA compliance requirement) and will go into Pre-Alert approximately 12 seconds before the timer has reached full alarm. Pre-Alert prompts the user to move to reset the motion timer. If the user moves during the Pre-Alert time, the Pre-Alert timer will reset. If in full alarm, the user must press the two side buttons simultaneously to reset the alarm.
